Free practice test · no sign-up
LEED AP ID+CFree LEED Accredited Professional — Interior Design & Construction practice test
- ✓ 10 free questions
- ✓ Instant answers & explanations
- ✓ No sign-up, no email
10 real LEED AP ID+C practice questions with instant answers and explanations — no account, no credit card, no email. Score yourself, then unlock the full bank of 300 questions whenever you’re ready.
During pre-design for a tenant fit-out, the interior design team convenes an early analysis session with the base building engineer before space planning begins. What is the primary purpose of this session under the Integrative Process credit?
Answer key
All 10 LEED AP ID+C questions & answers
Prefer to just read the answers and explanations? Here’s the full key for this free LEED AP ID+C test.
Q1. During pre-design for a tenant fit-out, the interior design team convenes an early analysis session with the base building engineer before space planning begins. What is the primary purpose of this session under the Integrative Process credit?
Correct answer: D. To identify synergies between systems, such as how daylighting and layout decisions affect the mechanical loads the base building must serve
The Integrative Process credit is meant to surface cross-disciplinary relationships early, such as how daylight and layout choices influence HVAC loads, so decisions are made holistically rather than in silos.
Q2. A design team wants to pursue the Integrative Process credit for an office tenant space. Which pair of analyses is most directly required to earn this credit?
Correct answer: A. Energy-related and water-related systems analysis
The Integrative Process credit requires a simple box energy analysis and a water budget analysis performed early enough to influence design decisions across disciplines.
Q3. An interior designer is coordinating with the property owner on a tenant improvement project. Why is it especially important to involve the base building operations staff during the integrative process, even though the interior scope does not touch central plant equipment?
Correct answer: D. Tenant loads and control strategies interact with base building systems, so uncoordinated tenant decisions can undermine building-wide performance and comfort
Because tenant spaces share mechanical, electrical, and sometimes water systems with the base building, coordinating early with operations staff prevents conflicts between tenant design choices and overall building performance.
Q4. A tenant space is being planned on the fifteenth floor of a downtown high-rise near multiple transit lines. Under Location and Transportation strategies for ID+C, which factor is most relevant to the tenant's credit-earning potential?
Correct answer: D. The site's existing density, diversity of uses, and proximity to transit, which are largely fixed by the building's location
For interior projects, Location and Transportation credit potential is mostly determined by where the base building sits, since tenants cannot change surrounding density, land use mix, or transit access.
Q5. A tenant is evaluating two candidate buildings for a new office suite. Building A is in a walkable mixed-use district with a rail stop within a five-minute walk; Building B is in a suburban office park reachable only by car. From a Location and Transportation standpoint, what should the tenant consider?
Correct answer: D. Building A offers a meaningfully stronger foundation for surrounding density and transit access credits than Building B
Surrounding density and diverse uses, plus access to quality transit, are credit categories under Location and Transportation, and Building A's walkable, transit-served context provides a stronger baseline than a car-dependent suburban site.
Q6. A tenant wants to encourage alternative commuting among employees moving into a new suite. Which of the following interior-scope actions would best support a Location and Transportation strategy related to bicycle commuting?
Correct answer: C. Providing secure interior bicycle storage and coordinating with the landlord for shower and changing facility access
Even though tenants cannot control the building's location, they can influence bicycle facility credit potential by providing secure storage and arranging access to shower and changing facilities within their leased space or building amenities.
Q7. A tenant fit-out includes a new pantry sink, a break room dishwasher, and low-flow restroom fixtures shared with other tenants on the floor. For the Indoor Water Use Reduction credit, what is the correct approach to establishing the baseline?
Correct answer: C. Only fixtures installed entirely within the tenant's leased space are counted toward the baseline and design case
ID+C water efficiency calculations are scoped to fixtures and fittings within the tenant's control, comparing a baseline case against the as-designed fixtures specified for the space.
Q8. An interior design team is specifying restroom fixtures for a tenant suite and wants to maximize points under Indoor Water Use Reduction. Which specification decision contributes most directly to this goal?
Correct answer: C. Choosing dual-flush water closets and low-flow lavatory faucets rated well below baseline flow rates
Indoor Water Use Reduction is calculated from the flush and flow rates of installed fixtures compared to code baselines, so specifying high-efficiency water closets and faucets directly reduces calculated water use.
Q9. A tenant's pantry area includes a commercial ice machine and a garbage disposal. When calculating process water use reduction as an optional exemplary strategy, which statement is accurate?
Correct answer: D. Appliances such as ice machines and dishwashers can be evaluated for water efficiency, and selecting efficient models can support additional water reduction documentation
While the core Indoor Water Use Reduction credit focuses on fixtures and fittings, appliances like ice machines and dishwashers can factor into broader water efficiency strategy and documentation of efficient equipment choices.
Q10. A design team is unsure whether to include the base building's shared cooling tower makeup water in their tenant water calculations. What is the appropriate treatment?
Correct answer: C. Shared base-building systems outside the tenant's control, such as a central cooling tower, are excluded from the tenant scope of Water Efficiency credits
ID+C water efficiency credits are scoped to elements the tenant specifies and controls; shared base building systems like a central cooling tower fall outside the tenant's project boundary.
Ready for the full LEED AP ID+C bank? Start free.
300 questions, timed mock exams, and missed-question review — 30 free questions, no card.
Start free trial